-
Even More Tip Fairing
Yesterday and today were filled with sanding off the fairing compound (not what it’s called) and then mixing up another batch and layering more…
-
More Tip Fairing
With a thicker mix of epoxy-flox, I went in and added more compound to the remaining areas of the tips. It’s messy, and again,…
-
Tip Fairing
Added epoxy-flox mixture to tips. Further reinforced tips, which also allows the ability to sand back if needed a little bit. Filler was allowed…
-
Fiberglass Reinforcement
Fiberglass reinforcing gussets were added to most of the tip pieces. These will prevent the added fiberglass from cracking free/separating from the factory part.
-
Casting Lead
Very simple day today. The off-cut from the right counterweight was melted with other scrap into a mould that was routered into a 2…
Avionics Baffles Baggage Brakes Bulkheads Cabin canopy Cockpit Controls Control Surfaces Cowl Cowling Elevator Empennage Engine Fairings Fiberglass Finishing Finishing Kit Firewall Firewall Forward Flaps Forward Cockpit Fuel Delivery Fuel Tank Fuselage FWF Harness Landing Gear Lighting Oil Cooling Panel Pitot Rudder Seats Skins Skirts Slider Stabilizer Systems Trim Tab Windscreen Wing Wings Wiring