EP 4.35 Tail Fairing
- Post author By admin
- Post date
- Categories In Video
- No Comments on EP 4.35 Tail Fairing
Tag: Empennage
EP 4.35 Tail Fairing
EP 4.33 Attaching Rudder and Linkage
EP 4.32 Completing Tail Surface Installation
Rudder Installed
The rudder has been mounted! I’m quickly wrapping up work on the back end of the plane. The rudder was fairly uneventful to mount, though I anticipate substantially more work to get it hooked up…
Trim Tab Wired
The trim tab was wired and installed, with linkage, to create a working trim tab. This was cool to interact with.
Elevators, Vertical Stab
The elevators were mounted and hooked up. This was not without an issue with drilling, in which the holes in the elevator horn came too close to the edge and had to be fill welded shut for another shot at drilling. The vertical stab was also first trial fit, then mounted to the deck of […]
Mounting Tail Surfaces – A Start
Well, being done with the canopy for the time being, I need somewhere else to point my efforts, and mounting the tail surfaces here in the garage has been recommended by many a folk. The idea is to follow the instructions as if this were final construction, mounting the horizontal stabilizer, then elevators, hooking up […]
SE 1 One Year of Building
A special episode looking back at one year of building.
EP1.16 Rudder Tips
Rudder Update
I noted that when I was little, these things were called fins. That keeps going through my mind as I sand away at the filler and primer, staring at the metal structure. The fin is almost done. Fin tip is final sanded, and needs only one more coat of primer. Rudder tip primed with filling […]