-
More Wiring Cleanup
As promised: more wiring cleanup on the front of the plane. I finally got the slew of connectors related to the engine sensors tied…
-
Baffle Seals
Starting the baffle seals. I’ve found using magnets to hold them in place seems to work well as they are trimmed to size and…
-
Baffle Support
The stock rear baffle support utilize two crankcase bolts, one of which on the IOX-370 is occupied by a lift loop. Reluctant to remove…
-
Mixture Cable
I finally got my hands on an appropriately sized mixture cable as the stock size in the firewall forward kit was too short–another byproduct…
-
Alternate Air
As if the snorkel wasn’t complicated enough, we need to add an alternate air door in case the engine filter gets clogged. The trap…
Avionics Baffles Baggage Brakes Bulkheads Cabin canopy Cockpit Controls Control Surfaces Cowl Cowling Elevator Empennage Engine Fairings Fiberglass Finishing Finishing Kit Firewall Firewall Forward Flaps Forward Cockpit Fuel Delivery Fuel Tank Fuselage FWF Harness Landing Gear Lighting Oil Cooling Panel Pitot Rudder Seats Skins Skirts Slider Stabilizer Systems Trim Tab Windscreen Wing Wings Wiring