-
Tip Fairing
Added epoxy-flox mixture to tips. Further reinforced tips, which also allows the ability to sand back if needed a little bit. Filler was allowed…
-
Fiberglass Reinforcement
Fiberglass reinforcing gussets were added to most of the tip pieces. These will prevent the added fiberglass from cracking free/separating from the factory part.
-
Casting Lead
Very simple day today. The off-cut from the right counterweight was melted with other scrap into a mould that was routered into a 2…
-
More Filing
The lead counterbalances were filed more to ensure fit of the fiberglass tips. Sanded the tips a bit more. Short on time, delaying working…
Autopilot Avionics Baggage Brakes Bulkheads Cabin Cockpit Controls Control Surfaces Elevator Empennage Engine Exterior Fiberglass Finishing Kit Firewall Flaps Forward Cockpit Fuel Delivery Fuel Injection Fuel Tank Fuselage Instructions Interior Landing Gear Laser Cut Parts Linkage Misc Panel Planning Primer Priming Research Rudder Seats Skins Stabilizer Systems Trim Tab Weldment Wing Wiring