Skip to content
- EP 5.9 Pushing Forward
- EP 5.8 Securing Cowling via Skybolts
- EP 5.7 Cowling
- EP 5.6 CNC Aircraft Parts
- EP 5.5 Exhaust, Baffles, and Sensors
- EP 5.4 Oil Cooling and Baffles
- EP 5.3 Installing Engine Components
- EP 5.2 Engine Hung
- EP 5.1 New Engine Day
- EP 4.39 Work + Play
- EP 4.38 Wing Skins
- EP 4.37 More Wing Skins and Systems
- EP 4.36 Garage Makeover and Wing Work
- EP 4.35 Tail Fairing
- Project Update: The Low Effort Episode
- EP 4.34 The Big List
- EP 4.33 Attaching Rudder and Linkage
- EP 4.32 Completing Tail Surface Installation
- EP 4.31 Mounting the Tail Surfaces
- EP 4.30 Installing the Windscreen Part 2
- EP 4.29 Installing Windscreen Part 1
- EP 4.28 Fiberglass Canopy Skirt
- EP 4.27 The Planning and Cost of Avionics
- Avionics Rundown
- EP 4.26 Garmin Final Installation
- EP 4.25 Canopy Side Skirts
- EP 4.24 Fitting the Canopy
- EP 4.23 Canopy Bonding via Sika Flex
- EP 4.22 The Big Cut
- EP 4.21 Initial Slider Frame Fitting
- EP 4.20 Rear Skins and Roll Bar
- EP 4.19 Rudder Pedals, Brake Plumbing, More
- EP 4.18 Tech Counselor Review
- EP 4.17 Control Stick Grips
- EP 4.16 Installing the Artex ELT 345
- EP 4.15 Aircraft Lighting
- EP 4.14 More Purchases, More Unboxing, More Wiring
- EP 4.13 Adding More Wires to the Airframe
- EP 4.12 Garmin G3X Touch Powerup and Configuration
- EP 4.11 Mounting Antennas and TCW IBBS Backup Power
- EP 4.10 Avionics Mounting and Wiring Continues
- EP 4.9 Installing Fresh Air Vents
- EP 4.8 Adding Power
- EP 4.7 Holes in the Firewall
- EP 4.6 Harness and Connectors
- EP 4.5 Added Gear, Wheels, Brakes
- EP4.4 Electronic Components
- EP4.3 Wiring Harness
- EP4.2 Beginning Avionics
- EP4.1 Push Tubes and Autopilot Servos
- EP3.31 Adding a Hatch
- EP3.30 Fuel and Brake Lines
- EP3.29 Bending Fuel Tubing
- Project Update II: Engine, Finishing Kit, Avionics, and More
- EP3.28 Gear, Static Line, Seat Backs, Forward Structure, and More
- Project Update: Training, Avionics, Finishing Kit, Engine, and More
- EP3.27 Flap Mechanics
- EP3.26 Seatbacks
- EP3.25 Seat Bottoms and Controls
- EP3.24 Baggage Compartment
- EP3.23 The Exterior Steps
- EP3.22 Working in the Aft Fusleage
- EP3.21 Fuselage Aft Deck
- EP3.20 The Big Flip
- EP3.19 Assembling the Fuselage
- EP3.18 Final Fuselage Parts Prep
- EP3.17 Preparing and Priming Fuselage Skins
- EP3.16 Fuselage Disassembly
- EP3.15 Forward Fuselage Fabrication
- EP3.14 Rudder Pedals
- EP3.13 Forward Fuselage Structure
- EP3.12 Fitting the Firewall
- EP3.11 Joining the Fuselage
- EP3.10 More Middle Fuselage
- EP3.9 Middle Fuselage
- EP3.8 Riveting the Aft Fuselage
- SE 1 One Year of Building
- EP3.7 Priming an Airframe
- EP3.6 The Aft Fuselage
- EP3.5 Bending Longerons
- EP3.4 Aft Bulkheads
- EP3.3 Bulkhead 705
- EP3.2 Firewall, Bulkhead 704
- EP3.1 Starting the Fuselage
- EP2.16 Finishing Wings
- EP2.15 Flaps
- EP2.14 Ailerons
- EP2.13 Fairings, Braces, and Hinges
- EP2.12 Attaching Tanks and Skins
- EP2.11 Leading Edges, Part II
- EP2.10 Leading Edges, Part I
- EP2.9 Left Fuel Tank
- EP2.8 Fuel Tank Leaks?
- EP2.7 Fuel Tank, Part II
- EP2.6 Fuel Tank, Part I
- EP2.5 Wing Skins, Leading Edge, and Tank
- EP2.4 Wing Structures
- EP2.3 Rear Wing Spars
- EP2.2 Main Spar and Tie Downs
- EP2.1 Wing Fixtures and Spars
