I finally got my hands on an appropriately sized mixture cable as the stock size in the firewall forward kit was too short–another byproduct of a fuel servo that size just a hair further forward, as well as the fact that I’ve gone with very different geometry for the linkage. (A direct shot instead of […]
Hello. This post is provided as a supplement to the avionics review video, and houses the files for your own review–which makes me nervous, so a bit about that: The file provided are to demonstrate my approach for wiring only. They are not intended to educate, illustrate, or instruct you on how to wire your […]
Once again, the panel returns from the fabricator; this time for good. I love every aspect of it, and wasted no time applying the dry transfer decals. They came out equally as good. All of the pieces coming together is a real joy. I think the result surpassed my expectations. All piece will receive lacquer […]
Back to the avionics panel for a bit. With the final placement now determined for all avionics, I had the stock Van’s panel cut by water jet at a local fabricator. Really this should still be at the fabricator, as they still have work to do. But so do I. Before the panel can be […]
At this point most of the components are installed and hooked up. Still not quite ready for first power up, as there are remaining loose ends. The punch list on the way to power up is long, but I seem to be cruising along pretty well.