Tag: Harness
Harness Test Fit
Nervous about doing something wrong, I’ve pulled the whole harness from the build table and, well, taped it up in the cockpit. Overall, I’m pretty happy with the fit. It relieved some of my concern about the length of wires, routing, etc. It has, however, brought back the realization that this panel/subpanel will be very […]
Wiring Harness and Panel Prototype
Work on the harness continues with more wiring, labeling, and research. I’ve found it necessary to start a wire log, with each wire numbered and logged including to/from, gauge, color, notes, etc. In addition to listing the wires, the document also tracks all fuses with locations within the bus system, tracks all grounds and their […]
Beginning the Harness
I’ve started to make runs on work table now harness board. With the wiring diagram nearly complete, I should be able to get the majority of the harness built on the board without too much time spent breaking for research. After running all of the wiring that will go to the G5 I decided to […]